[Antir_scribes] More info - Charter Design - Seal spacing

[AnTir Scribe]

Additional note from Bronwen about Seal spacing for Charters

Copied from previous note
"The seal matrix is 2 3/8" dia. and for an experienced seal maker, the seal
usually comes out around 2 5/8".  You should probably be leaving about a 3"
to 3 1/2" dia. space for the Kingdom seal - if you are not already.

The signet ring is 7/8" x 3/4"  but the puddle of wax is around 1 1/2" to 1
3/4" and for mine, you might need around a 2" diameter space".(if you are
designing a scroll to use the Kingdom Signet seal instead of large the
Kingdom Seal.

Eleanor,

Please let the list know if Their Highnesses do not want any charters
designed to use the smaller Signet Seal.


Bronwen





On 10/12/08, cknutson3 at aol.com <cknutson3 at aol.com> wrote:
>
> OK, here's some info. I really need to stop writting emails when am half a
> sleep!
>
> What I need is a design on white paper, the design format is 11 x 14, Black
> lines only and If possible include the calligraphy. It should have a 1 inch
> clear (unused) border to facilitate framing. A 2.5 inch space should be left
> for a seal, it should be mark in small letters "seal".
>
> Thanks for you patience,
> Eleanor de Sackville
> _______________________________________________
> Antir_scribes mailing list
> Antir_scribes at castle.org
> http://www.castle.org/mailman/listinfo/antir_scribes
>